Cess Automation, Ahmedabad

• DVP 15MC11T-06 (CANopen)
• DVAP50MC11T-06 (EtherCAT)

• DVP10MCT (CANopen)

• DVP15MC11T (CANopen)
• DVP50MC11T (EtherCAT)

• Built-in 16/24 I/O points; max. 480 I/O points 
• Program capacity: - DVP10MC: Ladder 16k steps / Motion 1 Mbytes - DVP15 MC/50 MC: 20M bytes 
• Built-in Ethernet, RS-232 and RS-485 ports, and support standard Modbus ASCII /RTU protocol 
• e-CAM function (2.048 points) for rotary / flying shears 
• Support DVS-S Series modules (both left and right side) for multiple options
• Flexible industrial networking applications (DeviceNet Master/Slave, CANopen Master/Slave and PROFIBUS DP Slave modules) 
• Provide standard communication cables, terminal resistors, distribution boxes and more accessories for easy wiring and connection 

• Built-in RS-232 and RS-465 ports
• 2 / 3 / 4 / 5 / 6 axes linear interpolation motion control 
• Highly accurate PWM 200 kHz output, resolution 0.3% 
• 6 groups of high-speed captures (mark correction, frequency measurement), comparative output, Mark / Mask function (for bag making) 
• Supports standard MODBUS ASCII /RTU protocol 
• Moron control functions: - High-speed pulse output: built-in 6 sets of A/B phase pulse outputs - 2 sets of 200 kHz output, 4 sets of 1 MHz output - 6 sets of high-speed counters and hardware digital filter for counting - Single-axis motion control function (supports MPG, single-speed and two-speed - Electronic gear function 

• Built-in RS-232 and RS-485 ports
• Compatible with G-code / M-code
• 3-axis linear/arc/helical interpolation
• Supports electronic cam (2,048 points) function for flying shear and rotary cut applications
• All models can be applied as motion controllers or extension modules
• Supports standard MODBUS ASCII/RTU protocol
• Motion control functions: - Built-in NB phase differential signal outputs: 2 sets (DVP2OPMOOD)/ 3 sets (DVP2OPMOOM) with differential output frequency of max. 500 kHz - Supports MPG inputs - Single-axis motion control function (supports MPG, single-speed and two-speed positioning) - Electronic gear function 

• Built-in Ethernet DVP12SE: MODBUS 8 Ethernet/IP (Explidt message) DVP26SE: MODBUS 8 Ethernet/IP (Adapter mode, explicit message) 
• IP Filter function as firewall for first line protection against malware and network threats 
• No battery required: RTC function operates for 15 days after power off 
• Supports DVP-S Series modules (left-side and right-side) (DVP26SE only supports right-side modules) 

We offer to our clients the product range of DOP A-series 4.3 -Inch Advanced HMI as we are the prominent supplier and manufacturer of industrial automation solution. This series is specially designed for practical usage and it can meet the general requirement of the user. Currently, we provide the models of 5.7", 8" and 10.4" display with monochrome and multiple colors. Moreover,a wide range of industrial monitoring systems, such as HVAC, Printing Machine, Exposure Machine and Product Line Monitoring Equipment are the major applications of these series.

Specifications:

• 5.7" STN LCD 256 colors
• 10.4" TFT LCD 256 colors
• 5.7" STN LCD 8 grays blue
• 5.7" FSTN LCD 16 grays
• 8" TFT LCD 65536 colors
• ARM9 CPU 206.4MHz
• Support SM card
• USB 1.1 for high-speed screen data download
• 2 sets of COM ports to connect multiple communication modes
• Support max. 8 different languages for multilingual screen editing
• Touch screens comply with IP65 & NEMA4 requirement

• 32-bit dual-core multitasking processor 
• Excellent program execution speed: La 2Ons 
• Max. 1/0: - DIO: Max. 4,352 points - A10: Max. 544 channels - RIO: Max. 125,440 digital points/ 3,920 analog channels 
• Program capacity: Max. 1M steps (4MB) 
• Data register (Dx-L): 512k words 
• CPU with built-in fully isolated RS-232 / 422 / 485 ports, Mini USB port, Ethernet port and SDHC card slot (compatible with the memory cards on the market) 
• Abundant selection of A10 modules, DIO modules, temperature modules, network modules, pulse-train as DMCNET motion control modules 

• Highly integrated programming software ISPSoft: Graphical interface with 5 programming languages 
• Snhanczdlley flexibility: Man.100m (cable) or 2km (optical fiber) between 2 local extension racks 
• Redundant system and hot-swapping function ensure non-slop system operation for Improved maintainability

• High-end industrial equipment (textile machines, packaging machines, injection and molding machines, electronics equipment, printing machines, paper making machines, warehousing management systems, logistics management systems
• System Integration applications: water treatment, HVAC system, traffic monitoring system

• The redundant CPU of the AH Series adopts a reliable redundancy structure, and integrates synchronous modules, Ethernet ports and serial communication interfaces for a more competitive control solution. 

• The redundant backplane of the AH Series provides redundant power supply and communication interfaces for a complete control solution. 

• 32-bit SoC (System on Chip) CPU for high-performance and high-speed computing 
• CPU with built-in RS-485 port
• 2, Mini USB port, Ethernet port, and Micro SD card slot 
• Max. 8 axes control via CANopen motion network / max. 6 axes control via pulse control (200 kHz) 
• Robust rackless design and patented DIN rail clips for direct plug-in/plug-out module installation and replacement 
• Various modules for selection: digital I/O modules, analog I/O modules, load cell modules, temperature measurement modules, serial communication modules, industrial bus modules 
• PLC programming software (ISPSoft) for program editing, hardware and network configuration, system diagnosis and axes positioning control 

• High speed execution: up to 40k steps/ms (Condition: 40% LD instruction / 60% MOV instruction) 

• Up to 8-axis CANopen positioning control with AS-FCOPM communication card 
• Fast positioning configuration in one initialization instruction without building CANopen data exchange table 
• Batch download of programmable servo drive parameters to avoid data lo. 
• Axis control by instructions to enhance the legibility and maintainability of PLC programs 

• AS3327,4 / AS332P-A transistor CPU: 6 axes (or 12 channels) 200 kHz 
• AS324kf1-A differential CPU: 2 axes 4 MHz -) 4 axes 200 kHz 
• Supports positioning planning table for fast positioning planning and path simulation 
• Choose any given 2 axes for linear and arc interpolation 

• Supports star, linear network topology for fast expansion and management on production lines 
• Compatible with IT network no independent network or IT technician required 
• Combines with Delta's industrial Ethernet solutions to construct loT for more automation application and industrial upgrades 

• 2D simulation Intuitive 2D track simulation without complicated calculation for real-time path planning 
• Path list Multiple combination for positioning modes and tracks Fast path planning via table-structured planning 
• Axis parameter setting Inh.litWe configuration interface for easy axis parameter setting without manual reference 

• Data Logger / Tracer
• Real-time monitoring: High-speed tracer for fast sampling within I scanning cycle 
• Stable logging: Long-tine data logger saves up to 32,768 data records able to be transferred to SD cards 
• Precise data capture: Supports a variety of sampling intervals trigger modes, software settings, and hardware execution 
• Convenient comparison: Multiple data logs in various data formats can be recorded at the same time 
• Efficient data analysis: Supports trend display, scaling, arrangement, merge and measurement 

• High-end equipment for electronics manufacturing, machinery processing, food packaging and other industries 

• 16/20/24/32/40/60/80 I/O points for a variety of applications
• No battery required; RTC function operates for at least one week after power off (hardware versiion 2.0 or above)
• DVP32ES2-C model with built-in CANopen (Baud: 1 Mbps)

• Built-in 12-bit 4 analog inputs / 2 analog outputs; and 14-bit analog I/O extension module
• Built-in PID auto tunning function for complete analog control solution DVP30EX2 model as temperature and analog I/O PLC
• Highly efficient processing ability: 1 k steps of programs can be completed within 1 ms
• Max. 100 kHz pulse control; specific motion control instructions (mark/masking and instant frequency changing) available for multi-axis applications
• Up to 4-level password protection protects your source programs and intellectual property

• High-speed pulse output:4 axes of 200 kHz pulse output 
• Supports max. 4 hardware 200 kHz and 2 hardware 20 kHz high speed counters 
• Various motion control instructions to achieve high-speed and high-precision positioning control for labeling machines, packaging machines, printing machines and more applications
• Linear/arc interpolation motion control function 
• Provides up to 10 external interrupt pointers 

• Auto backup function to prevent program and data loss even when the battery runs out 
• Secondary backup function saves an extra copy of programs and data to enhance program safety 
• Up to 4-level password protection protects your source programs and intellectual property 

• Built-in RS-232 and RS-485 ports (Master/Slave)
• Supports standard MODBUS ASCII/RTU protocol
• and PLC Link function
• Motion control functions:
• 4 points of 10 kHz pulse output

• Built-in 4 analog inputs / 2 analog outputs
• Supports standard MODBUS ASCII / RTU protocol and PLC Link function
• No battery required; RTC function operates for at least one week after power off (hardware version 2.0 or above)
• Supports DVP-S Series modules (including left-side high-speed modules)
• Motion control functions:
• 4 points of high-speed pulse output: 100 kHz / 2 points, 10 kHz / 2 points
• 8 points of high-speed pulse input: 100 kHz / 2 points, 10 kHz / 6 points
• Supports 2-axis linear and arc interpolation

• 2 built-in Ethernet ports/Support SD card 
• 2 sets of COM ports/2 extension COM ports, support up to 4 RS-485 
• Support Analog/IP camera functions & multilingual input 
• Mini USB client/USB host 
• Support FTP/Email/VNC/Web monitor 

• Built-in Ethernet 
• 1 COM port/1 extension COM port 
• Multilingual input
• USB host 
• Support FTP/Email/VNC/Web monitor 

• 2 built-in Ethernet ports/Support SD card 
• 2 sets of COM ports/2 extension COM ports, support up to 4 RS-485 
• Support Analog/IP camera functions & multilingual input 
• Mini USB client/USB host 
• Support FTP/Email/VNC/Web monitor 

• Built-in Ethernet
• 2 sets of COM ports/1 extension COM port
• Multilingual Input
• USB host
• Support FTP/Email/VNC/Web monitor

• Built-in Ethernet/Support SD Card
• 2 sets of COM ports/1 extension COM port
• USB host
• Support FTP/Email/VNC/Web Monitor

• 2 built-in Ethernet Ports/Support SD card
• 2 sets of COM Ports/2 extension COM ports, support up to 4 RS-485
• Multilingual input
• Mini USB client/USB host
• Support FTP/Email/VNC/Web monitor

• 2 built-in Ethernet ports/Support SD card 
• 2 sets of COM ports/2 extension COM ports, support up to 4 RS-485
• Multilingual input 
• Mini USB client/USB host 
• Support FTP/Email/VNC/Web monitor 

• Built-in Ethernet 
• 2 sets of COM ports/1 extension COM port 
• USB host 
• Support FTP/Email/VNC/Web monitor 

• Built-in Ethernet/Support SD card 
• 2 sets of COM ports/1 extension COM port 
• USB host 
• Support FTP/Email /VNC /Web monitor 

• Support audio output (MP3, Way files)
• USB host for direct connection to USB disk, printer, mouse and keypad 
• Ethernet ports 
• Support SDHC card 

• Aluminum enclosure with dark gray mold texturing 
• 2 sets of COM ports, support RS-232/RS-422/ RS-485 
• USB host for direct connection to USB disk, printer, mouse,and keypad 
• 2 Ethernet ports 
• Support SDHC card 

• Aluminum enclosure with dark gray mold texturing 
• 2 sets of COM ports, support RS-232/RS-422/ RS-485 
• USB host for direct connection to USB disk, printer, mouse and keypad 
• 2 Ethernet ports 
• Support SDHC card 

• Support SDHC card
• Built-in emergency stop switch
• Built-in enable switch (rear side)
• Serial communication models support RS-485/RS422
• Ethemet communication models support one Ethernet port 
• Optional MPG (Manual Pulse Generator) 
• • Integrated style cables available (5m/10m) 

• 4.1" STN-LCD 
• User-defined function keys available 
• Support RS-232 / RS-022 / RS-485 ports (TPO4G-AL2) 
• Password protection function available 
• User-defined boot screen available 
• • Built-in real time clock (RTC) 

• 4.1" STN-LCD 
• 0-9 numeric keys and user-defined function available 
• Support Modbus ASCII /RTU modes 
• Password protection function available 
• User-defined boot screen available 
• • Built-in real-time clock (RTC) 

• Adopt the core of DVP-SS2 Series PLC
• Provide 2 sets of 10kHz high-speed pulse input
• Touch Screen
• Support Modbus ASCII/RTU modes
• Built-in real-tiime clock (RTC)
• Digital and analog I/O terminals available

• Adopt the core of DVP-SS2 Series PLC
• Provide 2 sets of 10kHz high-speed pulse input
• Provide 0-9 numeric kyes with user-defined function
• Built-in USB port for program upload/download
• Built-in real-time clock (RTC)
• Digital and analog I/O terminals available

• High-speed pulse output: max. 4 axes of 200 kHz pulse output (DVP40 /48/64 /80EHOOT3) 
• Supports max. 4 hardware 200 kHz high-speed counters 
• Various motion control instructions to achieve high-speed and high-precision positioning control for labeling machines, packaging machines, printing machines and more applications 
• Linear/ arc interpolation motion control function 
• Provides up to 16 external interrupt pointers 

• Auto backup function prevents program and data loss even when the battery runs out 
• Secondary backup function saves an extra copy of programs and data to enhance program safety 
• Up to 4-level password protection protects your source programs and Intellectual property 

• Built-in 1 RS-232 and 2 RS-485 ports (Master / Slave)
• Supports standard MODBUS ASCII / RTU protocol and PLC Link function
• No Battery Required; RTC Function Operates for 15 Days After Power Off
• Supports DVP-S Series modules (including left- side high-speed modules)
• Motion control functions:
• 4 points of high-speed pulse output: 100 kHz / 2 points, 10 kHz / 2 points
• 8 points of high-speed pulse input: 100 kHz / 2 points, 10 kHz / 6 points, 1 set of A / B phase 50 kHz
• Supports 2-axis linear and arc interpolation