Cess Automation India LLP

• Modbus TCP protocol 
• Modbus TCP connections
• RTU mapping 
• Simple firewall 
• Email alarm 

• Modbus TCP slave protocol
• Able to connect 8 DVP-S Series analog I/O modules
• Able to connect digital I/O (256 points) modules
• RS-485 port supports max. 32 MODBUS slaves
• Smart PLC if-then function
• Smart Monitor function
• Supports webpage setup and on-line monitoring
• Serial virtual COM available

• Support DIACIoud Cloud Management Platform, no ISP public IP address required 
• Support Modbus TCP and MODBUS ASCII/RTU protocols 
• Firewalls: Stateful Packet Inspection (SPI), Denial of Service (DoS) attacks, NAT, Port triggering, Port mapping, IP address filtering, MAC address filtering, URL filtering 

• 8-Port FE + 1-Port GbE, Gigabit uplink port elevating transmission bandwidth 
• Complete L2 network management functions: VLAN, QoS, LACP, IGMP & SNMP v1/v2c/v3 
• IPv6 address suitable for larger network and neighbor discovery 
• Support Modbus TCP and EtherNet/IP protocols that facilitate remote management by SCADA and other industrial devices 
• Proprietary ONE RING and ONE CHAIN high-end redundancy technology adopts easy-to-build multiple ring topology, with self-healing recovery time <20 ms to ensure reliable network transmission 
• Loopback-detection to avoid broadcast storms by automatically shutting down the ports over a switching loop 
• Auto warning by emails, DI, relay, syslog & SNMP trap 
• IP40 metal case: -40°C-75°C operating temperature 
• Certifications: UL 508, IEC 61131-2, CE, FCC and RCM 

Cess Automation India LLP DVS-G408W01 PoE Unmanaged Switch is a reliable and high-performance networking solution designed to provide seamless connectivity for small to medium industrial and commercial networks. This unmanaged switch features Power over Ethernet (PoE) support, enabling simultaneous data and power transmission to connected devices like IP cameras, access points, and VoIP phones.

Ideal for industrial automation, security systems, and office networking, the DVS-G408W01 PoE Unmanaged Switch ensures stable network performance, plug-and-play installation, and minimal maintenance requirements. Its robust design makes it suitable for demanding environments.

Key Features:

• 8-port PoE unmanaged switch for simple and efficient network setup

• Supports simultaneous data and power delivery to connected devices

• Plug-and-play installation with no configuration required

• High reliability and stable network performance

• Ideal for IP cameras, access points, VoIP phones, and industrial networking

• Compact and durable design for industrial and commercial applications

With DVS-G408W01 PoE Unmanaged Switch by Cess Automation India LLP, users can easily expand their network while powering devices efficiently, ensuring reliable and cost-effective connectivity.

Cess Automation India LLP DVPPF02-SL PROFIBUS DP Slave Module is a high-performance communication module designed for seamless integration into industrial PROFIBUS DP networks. This slave module enables reliable data exchange between master controllers and field devices, ensuring precise process control and efficient automation operations.

Ideal for industrial automation, process control, and motion systems, the DVPPF02-SL PROFIBUS DP Slave Module provides stable communication, reduces wiring complexity, and enhances overall system reliability. Its robust construction makes it suitable for demanding industrial environments.

Key Features:

• High-performance PROFIBUS DP Slave Module for reliable device communication

• Supports real-time data exchange with master controllers

• Simplifies integration and reduces wiring complexity

• Compact, durable, and industrial-grade design

• Ideal for process automation, industrial machinery, and motion control

• Enhances system reliability and operational efficiency

• PROFIBUS DP slave protocol 
• Supports GSD files identification and cyclic data transmission

• DeviceNet protocol 
• Able to connect max. 63 slaves 
• Supports EDS files identification and cyclic data transmission 
• Max. network connection distance: 500 m
• RTU mapping 

Cess Automation India LLP DVPPF02-H2 PROFIBUS Slave Module is a high-performance communication module designed for seamless integration into industrial PROFIBUS networks. This slave module enables reliable data exchange between master controllers and field devices, ensuring accurate process control and efficient automation operations.

Ideal for industrial automation, motion control, and process monitoring applications, the DVPPF02-H2 PROFIBUS Slave Module provides stable communication, reduces wiring complexity, and enhances overall system reliability. Its robust construction ensures consistent performance even in demanding industrial environments.

Key Features:

• High-performance PROFIBUS Slave Module for reliable device communication

• Supports real-time data exchange with master controllers

• Simplifies integration and reduces wiring complexity

• Compact, durable, and industrial-grade design

• Ideal for process automation, industrial machinery, and motion control

• Enhances system reliability and operational efficiency

With DVPPF02-H2 PROFIBUS Slave Module by Cess Automation India LLP, industries achieve precise control, seamless communication, and optimized performance in automated systems.

Cess Automation India LLP DVPDT01-S DeviceNet Slave Module is a high-performance industrial communication module designed to enable seamless integration of devices into DeviceNet networks. This slave module ensures reliable data exchange between master controllers and field devices, facilitating efficient process control and automation.

Ideal for industrial automation, motion control, and factory networking applications, the DVPDT01-S DeviceNet Slave Module simplifies system integration, reduces wiring complexity, and enhances overall network reliability. Its robust construction makes it suitable for demanding industrial environments.

Key Features:

• High-performance DeviceNet Slave Module for reliable network communication

• Enables real-time data exchange with DeviceNet master controllers

• Simplifies integration and reduces wiring complexity

• Compact, durable, and industrial-grade construction

• Ideal for industrial automation, motion control, and factory networking

• Enhances system efficiency and reliability in automated applications

With DVPDT01-S DeviceNet Slave Module by Cess Automation India LLP, industries achieve precise control, seamless device communication, and optimized performance in automated systems.

• 5-Port GbE
• Support IEEE 802.1p based QoS for packet forwarding precedence
• Built-in Broadcast Storm Protection
• Transparent transmission of VLAN tagged packets
• Jumbo packet transmission: Up to 9,216 Bytes
• EEE Green Ethernet for power savings
• Certifications: UL 508, IEC 61131-2, CE, FCC and RCM

Cess Automation India LLP RTU-485 RS-485 Remote I/O Communication Module is a high-performance device designed for efficient data communication and control in industrial automation systems. This module enables reliable RS-485 communication between remote I/O devices and central controllers, ensuring seamless monitoring and process control.

Ideal for industrial automation, SCADA systems, and process monitoring, the RTU-485 RS-485 Remote I/O Communication Module provides stable communication, easy integration, and real-time data exchange, enhancing the overall efficiency of automated operations. Its robust design ensures consistent performance even in harsh industrial environments.

Key Features:

• High-performance RS-485 communication module for remote I/O integration

• Enables reliable data exchange between remote devices and controllers

• Supports real-time monitoring and process control

• Compact, durable, and industrial-grade construction

• Ideal for SCADA, PLCs, and industrial automation systems

• Simplifies integration and improves system efficiency

• Modbus protocol 
• Able to connect 8 DVP-S Series analog 110 modules 
• Able to connect digital I/O (256 points) modules 

Cess Automation India LLP DVPPF01-S PROFIBUS Slave Module is a high-performance communication module designed for seamless integration into industrial PROFIBUS networks. This slave module enables efficient and reliable data exchange between master controllers and field devices, ensuring precise process control and optimized automation performance.

Ideal for industrial automation, process control, and motion systems, the DVPPF01-S PROFIBUS Slave Module simplifies wiring, enhances system reliability, and ensures stable communication in demanding industrial environments.

Key Features:

• High-performance PROFIBUS Slave Module for reliable industrial communication

• Supports real-time data exchange with PROFIBUS master controllers

• Reduces wiring complexity and simplifies system integration

• Compact, durable, and industrial-grade design

• Ideal for industrial automation, motion control, and process monitoring

• Enhances operational efficiency and system reliability

With DVPPF01-S PROFIBUS Slave Module by Cess Automation India LLP, industries achieve seamless network communication, precise process control, and reliable performance for automated systems.

Cess Automation India LLP DVPDT02-H2 DeviceNet Slave Module is a high-performance industrial communication module designed to enable seamless integration of field devices into DeviceNet networks. This slave module ensures reliable, real-time data exchange between master controllers and connected devices, enhancing automation control and process efficiency.

Ideal for industrial automation, motion control, and factory networking applications, the DVPDT02-H2 DeviceNet Slave Module simplifies system wiring, provides robust communication, and ensures consistent performance even in demanding industrial environments.

Key Features:

• High-performance DeviceNet Slave Module for reliable industrial communication

• Enables real-time data exchange with DeviceNet master controllers

• Simplifies system wiring and integration

• Compact, durable, and industrial-grade design

• Suitable for industrial automation, motion control, and factory networks

• Enhances system reliability and operational efficiency

With DVPDT02-H2 DeviceNet Slave Module by Cess Automation India LLP, industries achieve precise device communication, seamless network integration, and optimized performance in automated systems.

• BACnet MS/TP slave, standard Modbus and user-defined RS-422/485 communication protocols 
• Compatible with software and DDC of major brands on the market; remote I/O and converter function available when connected with a PLC with I/O point extension 
• Isolated power and communication provide strong noise immunity. Built-in 120 ohm terminal resistor switch and feed-through terminals with spring plugs 
• Data transmission setting via software, no complex programming required

• DeviceNet protocol
• Supports EDS files for identification and cyclic data transmission
• Able to connect 8 DVP-S Series analog I/O modules
• Able to connect digital I/O (256 points)
• RS-485 port supports max. 8 Modbus Slaves

• 7-Port FE + 3-Port GbE Combo SFP, designed for backbone networks
• Complete L2 network management functions: VLAN, QoS, LACP, IGMP & SNMP v1/v2c/v3
• IPv6 address suitable for larger network and neighbor discovery
• Support Modbus TCP and EtherNet/IP protocols that facilitate remote management by SCADA and other industrial devices
• Proprietary ONE RING and ONE CHAIN high-end redundancy technology adopts easy to-build multiple ring topology, with self-healing recovery time <20 ms to ensure reliable network transmission
• Loopback-detection to avoid broadcast storms by automatically shutting down the ports over a switching loop
• DDM diagnosis function by SFP fiber module
• Auto warning by emails, DI, relay, syslog & SNMP trap
• Certifications: UL 508, IEC 61131-2, CE, FCC and RCM

Cess Automation India LLP LCP-1FE Fiber Transceiver is a high-performance communication device designed for reliable and high-speed data transmission over fiber optic networks. This transceiver converts electrical signals to optical signals and vice versa, ensuring seamless connectivity between network devices in industrial and automation applications.

Ideal for industrial automation, SCADA systems, and networking applications, the LCP-1FE Fiber Transceiver provides stable communication, long-distance signal transmission, and immunity to electromagnetic interference. Its robust construction guarantees consistent performance even in demanding industrial environments.

Key Features:

• High-speed fiber optic transceiver for reliable data communication

• Converts electrical signals to optical signals and vice versa

• Supports long-distance transmission with minimal signal loss

• Compact, durable, and industrial-grade design

• Ideal for industrial automation, networking, and SCADA systems

• Immune to electromagnetic interference for stable operation

• Full duplex operation
• DDM diagnosis function to monitor transmission quality
• Hot-plugging duplex LC connectors for maximum flexibility

• Compliant with IEEE 802.11n wireless technology for up to 450 Mbps data transmission rate
• IEEE 802.11r fast roaming with seamless switch (< 50ms) among APs
• Multiple wireless modes: AP, Client CPE, WDS P-T-P, WDS P-T-MP and repeater
• Support serial device servers and MODBUS gateways
• Wireless QoS (IEEE 802.11e, WMM) for video packet transmission precedence
• Enhanced wireless security: 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES)and 802.1X Authentication
• Support Modbus TCP protocol that facilitates the remote management by SCADA and other industrial devices
• Auto warning by emails, DI, relay, Syslog and SNMP trap

• UMTS/HSPA+: 800/850, 900, AWS 1700, 1900, 2100MHz
• Support GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz
• Support IPSec, OpenVPN, PPTP, L2TP and GRE VPN protocols; IPSec with CA certificate supports L2TP over IPSec
• Dual SIM redundancy design: seamless switch among ISP systems for continuous network connection
• Built-in RTC
• Flexible connection method over WAN port, e.g. static IP, DHCP client and more firewalls: Stateful Packet Inspection (SPI), Denial of Service (DoS) attacks, NAT, port triggering, port mapping, IP address filtering, MAC address filtering, URL filtering

Cess Automation India LLP Delta DVPCOPM-SL CANopen Master Module is a high-performance automation module designed to provide efficient communication and control in industrial CANopen networks. This master module enables seamless data exchange between multiple devices, ensuring precise coordination and reliable operation in automated systems.

Ideal for industrial automation, motion control, and process monitoring, the DVPCOPM-SL CANopen Master Module supports real-time communication, reduces wiring complexity, and enhances overall system efficiency. Its robust design and advanced functionality make it suitable for demanding industrial environments.

Key Features:

• High-performance CANopen Master Module for efficient device communication

• Supports real-time data exchange and control in CANopen networks

• Simplifies wiring and integration with industrial devices

• Compact, robust, and durable design for harsh industrial environments

• Ideal for industrial automation, motion control, and process monitoring

• Enhances system efficiency and reliability in automated applications

• CANopen protocol 
• Able to connect max. 110 slaves 
• Various PDO and high-speed SDO transmission 
• Supports NMT slave, Heartbeat, Emergency and more protocols 

• 28-Port full GbE (10GbE optional), modular design for flexible configuration 
• Layer 3 routing function allows multiple subnets in a large network to exchange data and information across a network address 
• Complete L2 network management functions : Q-in-Q VLAN, QoS, LACP, IGMP, SNMP v1/v2c/v3
• IPv6 address suitable for larger network and neighbor discovery 
• Support EtherNet/IP and Modbus TCP protocols that facilitates the remote management by SCADA and other industrial devices 
• Proprietary redundancy RING and redundancy CHAIN high-end redundancy technology adopts easy-to-build multiple ring topology, with self-healing recovery time <30 ms to ensure reliable network transmission 
• Enhanced network security with IEEE 802.1X, TACACS-F, SSH, HTTPS and SNMP v3 
• IEEE 1588v2 PTP (Precision Time Protocol) for precise time synchronization of network 
• Loopback-detection to avoid broadcast storms by automatically shutting down the ports over a switching loop 
• Cable diagnostic to auto-detect and report potential cabling issues 
• Auto warning by emails, relay, Syslog & SNMP trap 
• Compatible with various industrial protocols, including EtherNet/IP, Profinet, CC-LINK IE and DNP 3.0 
• 100 - 240 VAC and 125 - 370 VDC wide range redundant power input 
• IP30 metal case: -40°C-85°C operating temperature 
• Electrica) substation: IEC 61850-3, IEEE 1613 
• Rail traffic: EN 50121-4 
• Certifications: UL 61010, IEC 60950-1, CE, FCC, CCC and RCM 

• 24-Port FE + 4-Port GbE Combo SFP, designed for backbone network transmission at control centers
• Complete L2 network management functions: Q-in-Q VLAN, QoS, LACP, IGMP & SNMP v1/v2c/v3
• IPv6 address suitable for larger network and neighbor discovery
• Suport Modbux TCP and EtherNet/IP protocols that facilitate remote management by SCADA and other industrial devices.
• Proprietary ONE RING and ONE CHAIN high-end redundancy technology adopts easy-to-build multiple ring topology, with self-healing recovery time <20 ms to ensure reliable network transmission
• Enhanced network security with IEEE 802.1x, TACAS+, SSH, HTTPS and SNMP v3
• Loopback-detection to avoid broadcast storms by automatically shutting down the ports over a switching loop
• Cable diagnostic to automatically detect twisted-pair cable quality and periodically report issues
• Auto warning by emails, DI, relay, syslog & SNMP trap
• Compatible with various inustrial protocols, including EtherNet/IP, Profinet, CC-LINK IE and DNP 3.0
• 85-264 VAC and 88-370 VDC wide range redundant power input
• IP40 metal case: -40 deg to 70 deg C operating temperature
• Certifications: UL 60950-1, IEC 60950-1, CCC, CE, FCC and RCM

• 6-Port FE + 2-Port GEE Combo SFP, designed for backbone network 
• Complete L2 network management functions: VLAN, GoS, LACP, IGMP & SNMP v1/v2cN3 
• IPv6 address suitable for larger network and neighbor discovery 
• Support Modbus TCP and EtherNet/IP protocols that facilitate remote management by SCADA and other industrial devices 
• Proprietary ONE RING and ONE CHAIN high-end redundancy technology adopts easy-to-build multiple ring topology, with self-healing recovery time <20 ms to ensure reliable network transmission 
• Loopback-detection to avoid broadcast storms by automatically shutting down the ports over a switching loop 
• DDM diagnosis function by SFP fiber module 
• Auto warning by emails, DI, relay, syslog & SNMP trap 
• IP40 Metal case: -40°C-75°C operating temperature 
• Certifications: UL 508, IEC 61131-2, CE, FCC and RCM 

• 8-Port GbE 4-Port 100/1000Base-SFP, full Gigabit 
• 8 10/100/1000Base-T PoE (PSE) ports, each provides 30 W power supply to meet IEEE 802.3at and IEEE 802.3af standards 
• Complete L2 network management functions: VLAN, LIDS, LACP, IGMP & SNMP v1/v2c/v3 
• IPv6 address suitable for larger network and neighbor discovery 
• Advanced PoE management and intelligent powered device(PD) class detection 
• IEC 62439-2 MRP media redundancy protocol; IEEE 1588v2 PTP precision time protocol 
• DDM diagnosis function by SFP fiber module 
• Auto warning by emails, relay, syslog & SNMP trap 
• Certifications: CE, FCC and RCM 

• 5/8/16-Port FE; supports long distance transmission via fiber optics
• Support IEEE 802.1p based Qos for packet forwarding precedence
• Built-in Broadcast Storm Protection
• Transparent transmission of VLAN tagged packets
• Auto warning by relay output for link-down and power failure
• 12-48 VDC redundant terminal block power input
• Certifications: UL 508, IEC 61131-2, CE, FCC and RCM

Cess Automation India LLP Delta DVS-G406W01-2GF Unmanaged Switch is a high-performance networking device designed for reliable and efficient Ethernet connectivity in industrial and automation systems. The Delta DVS-G406W01-2GF Unmanaged Switch ensures stable data transmission, easy deployment, and seamless integration with existing network infrastructures.

Ideal for industrial automation, factory networking, and process control applications, the Delta DVS-G406W01-2GF Unmanaged Switch provides plug-and-play functionality, robust performance, and long-term reliability even in harsh industrial environments. With its compact design, the Delta DVS-G406W01-2GF Unmanaged Switch is easy to install and maintain, supporting uninterrupted network operations.

Key Features:

• High-performance Delta DVS-G406W01-2GF Unmanaged Switch for industrial Ethernet connectivity

• Stable and reliable data transmission for network devices

• Plug-and-play operation for quick deployment

• Compact, durable, and industrial-grade construction

• Ideal for factory automation, process control, and industrial networking

• Ensures seamless network integration and reliable performance

With Delta DVS-G406W01-2GF Unmanaged Switch by Cess Automation India LLP, industries achieve efficient Ethernet networking, stable connectivity, and enhanced performance for all industrial and automation communication needs.

• Full duplex operation
• DDM diagnosis function to monitor transmission quality
• Hot-plugging duplex LC connectors for maximum flexibility

Cess Automation India LLP DVS-G401 PoE Splitter is a high-performance device designed to separate Power over Ethernet (PoE) signals into independent data and power outputs. The DVS-G401 PoE Splitter ensures stable power delivery and reliable data transmission for network devices in industrial and commercial applications.

Ideal for IP cameras, wireless access points, and other PoE-enabled devices, the DVS-G401 PoE Splitter provides efficient power management, easy installation, and seamless integration with existing Ethernet networks. With its robust construction, the DVS-G401 PoE Splitter delivers reliable performance even in demanding environments.

Key Features:

• High-performance DVS-G401 PoE Splitter for separating power and data signals

• Ensures stable power supply and reliable data transmission

• Compact, durable, and industrial-grade design

• Ideal for IP cameras, wireless access points, and PoE-enabled devices

• Easy installation and seamless integration with Ethernet networks

• Provides efficient power management and enhanced network reliability

With DVS-G401 PoE Splitter by Cess Automation India LLP, industries achieve reliable PoE power distribution, optimized network performance, and seamless connectivity for all PoE-enabled devices.

• UMTS /HSPA+: '800/ 850, 900, AWS1700, 1900, 2100MHz 
• GSM/GPRS/EDGE: 850, 900, 1800, 1900MHz 
• Support DIACIoud Cloud Management Platform, no ISP public IP address required 
• Support Modbus TCP and MODBUS ASCII/RTU protocols 
• Firewalls: Stateful Packet Inspection (SPI), Denial of Service (DoS) attacks, NAT, Port triggering, Port mapping, IP address filtering, MAC address filtering, URL filtering 

• UMTS/HSPA+: 800 / 850, 900, AWS1700, 1900, 2100 MHz
• GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz
• Support DIACloud Cloud Management Platform, no ISP public IP address required
• Support Modbus TCP, Modbus ASCII/RTU protocols
• Dual SIM redundancy design: seamless switch among ISP systems for continuous network connection

• Standard Modbus communication and user-defined RS-422/485 communication protocols 
• Two sets of independent RS-422/485 communication interfaces 
• Isolated power and communication provide strong noise immunity; built-in 120 ohm terminal resistor switch and feed-through terminals with spring plugs 
• Data transmission settings via software, no complex programming required 
• Applied as PLC communication ports for program uploading/downloading and monitoring